EASY INSTALLATION The ENERG-CH400 has been specially designed for 100% safe installation under the chassis of vehicles. IP67-CERTIFIED BATTERY The ENERG-CH400 has been using components that conform to the IP67 standard in order to guarantee that it is resistant to water, dirt and dust. SEPARATE INPUTS/OUTPUTS FOR INCREASED SIMPLICITY AND SAFETY The ENERG-CH400 simplifies the installation of charge and discharge cables. TWO IP67-CERTIFIED CONNECTIONS Fastening system that works with a locking handle to guarantee maximum security.

CONNECTED The ENERG-E400 is delivered with a wired portable display, as well as a cable with a DB9 connection to safely connect to the battery pack’s CAN-BUS socket.

LiFePO4 batteries can be safely discharged over a wide range of temperatures –20°C to 60°C. However when it comes to recharging LiFePo4 batteries, to prevent irreversible damage to the battery, don’t charge them when the temperature falls below freezing (0°C or 32°F)..

ENERG-CH200/CH400/CH24200 LiFePO4 Batteries include a built-in Battery Management System (BMS) with intelligent internal heater module that can automatically activate when ambient temperature of the battery reaches freezing or sub-freezing ≤ 0°C or 32°F, ensuring the battery' environment stays warm enough for safe charging. Heating Module characteristic’s Power: 35W Working voltage: 8.8V to 15V Working current: 3 Amp to 5 Amp When the ENERG-CH lithium batteries detects that the ambient temperature is lower than 0°C/32°F, 1- If no charge detected, heater module stays asleep 2- If BMS of the battery detects power supply from Charger/Solar system/generator, a. BMS will turn on the heating function. b. When the battery temperature gets to 10°C/50°F, the heating function will turn off and the battery can be recharged normally.