ENERG-CH24200

LITHIUM BATTERY LIFEPO4 under chassis 24V / 200Ah

With the “ENERG-CH400” battery, EZA provides the largest storage solution on the market, which is perfect for everyone who wants to have a large reserve of energy; ideal for those who have vehicles longer than 10 metres.

The ENERG-CH400 battery is IP67-certified and 100% waterproof, which allows for totally safe installation under the chassis so as to also not take up any space.

UNDER-CHASSIS INSTALLATION
Designed to be installed under the chassis of vehicles.
IP67-CERTIFIED
The battery pack is 100% impermeable, as well as water- and dustresistant.
TWO OUTPUTS
Has two separate outputs for easy and secure installation.
CONNECTED
Equipped with a CAN-BUS socket to connect to a wired display.

EASY INSTALLATION The ENERG-CH24200  has been specially designed for 100% safe installation under the chassis of vehicles.

IP67-CERTIFIED BATTERY The ENERG-CH24200 has been using components that conform to the IP67 standard in order to guarantee that it is resistant to water, dirt and dust.

SEPARATE INPUTS/OUTPUTS FOR INCREASED SIMPLICITY AND SAFETY The ENERG-CH24200 simplifies the installation of charge and discharge cables.

TWO IP67-CERTIFIED CONNECTIONS

Fastening system that works with a locking handle to guarantee maximum security.


CONNECTED The ENERG-CH24200  is delivered with a wired portable display, as well as a cable with a DB9 connection to safely connect to the battery pack’s CAN-BUS socket.

LiFePO4 batteries can be safely discharged over a wide range of temperatures –20°C to 60°C. However when it comes to recharging LiFePo4 batteries, to prevent irreversible damage to the battery, don’t charge them when the temperature falls below freezing (0°C or 32°F)..

ENERG-CH200/CH400/CH24200 LiFePO4 Batteries include a built-in Battery Management System (BMS) with intelligent internal heater module that can automatically activate when ambient temperature of the battery reaches freezing or sub-freezing ≤ 0°C or 32°F, ensuring the battery' environment stays warm enough for safe charging. Heating Module characteristic’s Power: 35W Working voltage: 8.8V to 15V Working current: 3 Amp to 5 Amp When the ENERG-CH lithium batteries detects that the ambient temperature is lower than 0°C/32°F, 1- If no charge detected, heater module stays asleep 2- If BMS of the battery detects power supply from Charger/Solar system/generator, a. BMS will turn on the heating function. b. When the battery temperature gets to 10°C/50°F, the heating function will turn off and the battery can be recharged normally.

Details

EASY INSTALLATION The ENERG-CH24200  has been specially designed for 100% safe installation under the chassis of vehicles.

IP67-CERTIFIED BATTERY The ENERG-CH24200 has been using components that conform to the IP67 standard in order to guarantee that it is resistant to water, dirt and dust.

SEPARATE INPUTS/OUTPUTS FOR INCREASED SIMPLICITY AND SAFETY The ENERG-CH24200 simplifies the installation of charge and discharge cables.

TWO IP67-CERTIFIED CONNECTIONS

Fastening system that works with a locking handle to guarantee maximum security.


CONNECTED The ENERG-CH24200  is delivered with a wired portable display, as well as a cable with a DB9 connection to safely connect to the battery pack’s CAN-BUS socket.

LiFePO4 batteries can be safely discharged over a wide range of temperatures –20°C to 60°C. However when it comes to recharging LiFePo4 batteries, to prevent irreversible damage to the battery, don’t charge them when the temperature falls below freezing (0°C or 32°F)..

ENERG-CH200/CH400/CH24200 LiFePO4 Batteries include a built-in Battery Management System (BMS) with intelligent internal heater module that can automatically activate when ambient temperature of the battery reaches freezing or sub-freezing ≤ 0°C or 32°F, ensuring the battery' environment stays warm enough for safe charging. Heating Module characteristic’s Power: 35W Working voltage: 8.8V to 15V Working current: 3 Amp to 5 Amp When the ENERG-CH lithium batteries detects that the ambient temperature is lower than 0°C/32°F, 1- If no charge detected, heater module stays asleep 2- If BMS of the battery detects power supply from Charger/Solar system/generator, a. BMS will turn on the heating function. b. When the battery temperature gets to 10°C/50°F, the heating function will turn off and the battery can be recharged normally.

Technical specifications

CAPACITY 200 Ah
POWER 3000W
POWER PEAK (3S) 6000W
MAX. CHARGE CURRENT 80A - 100A
COMMUNICATION RS485 PORT
NOMINAL VOLTAGE 25,6V
TECHNOLOGY LIFEPO4
LIFESPAN Between 2,500 and 8,000 cycles
DISCHARGE/CHARGE CONNECTOR Dual positive/negative ports
CONNECTED TO THE BATTERY WIRED DISPLAY WITH DB9 CABLE
Dimensions (L X H X W) in mm 550 x 200 x 405
WEIGHT 46kg

Pictures

Complementary accessories